Custom Hydraulics & Design Blog


3/19/2020 3:36 PM
  Early O-rings were generally made from Natural Rubber, this was great in the beginning for leak prevention, but limited the applications they could be used on. Since the 1940s a much larger selection of compounds has been developed...
Read More
Posted By: quinton.watkins
3/19/2020 8:24 AM
How Hydraulic Systems Operate:
To begin, Hydraulic Systems are created by the careful planning, and understanding of numerous parts. These parts that once combined create a hydraulic system can be found bulleted below.


Reservoir: The reservoir...
Read More
Posted By: quinton.watkins
3/18/2020 11:56 AM
Determining the correct pneumatic fittings to use for an application or system is determined by several factors that an individual must consider before considering the type of pneumatic fitting to use.
- Tubing Type, understanding the tubing type needed / used...
Read More
Posted By: quinton.watkins
3/11/2020 8:32 AM
Introducing a New Standardin PTFE Hoses

As a pioneer in the production of hoses used in demanding conditions, Eaton is pleased to announce two new additions to ourfamily of hoses; Eaton WinnerTM PTFE EN-TW and EC-TW...
Read More
Posted By: quinton.watkins
2/12/2020 11:59 AM
Designed to preform,
EC600 X-FLEX high pressure spiral hydraulic hose was designed to meet the most demanding applications where very high pressure and the need for easy installation in tight spaces come together. 4S/6S Dura-Seal fittings...
Read More
Posted By: quinton.watkins
1/31/2020 9:23 AM
Eaton Dura-Kote sets a new standard

Get ready to upgrade your entire vocational vehicle fleet and industrial systems. Eaton's Dura-Kote™ plating technology is here to reign in a new era of corrosion-resistant technology.Eaton...
Read More
Posted By: quinton.watkins
1/14/2020 10:32 AM









The E-Z Clip System is engineered and approved for assembly, with Eaton’s latest multi-refrigerant, air conditioning hose, the GH001.

Refrigeration fluid is much more complicated to...
Read More
Posted By: quinton.watkins
1/14/2020 9:03 AM
Dura-Seal Fittings

Eaton Dura-Seal™ is an integral benefit to Eaton’s 4S/6S spiral fittings* for both Aeroquip and Weatherhead products. Eaton took multiple series of fittings and combined and redesigned them to provide a streamlined...
Read More
Posted By: quinton.watkins
1/14/2020 8:52 AM
Put your mind at ease assembling using Eaton hose assemblies.
The ET1187 machine is our most economical variable crimp machine to date. It boasts a broad crimp capability and “ease-of-use” dial. This machine is designed to easily...
Read More
Posted By: quinton.watkins
1/14/2020 8:36 AM
Want to raise the bar on steam hose performance?

There’s a new option on the market that lasts twice as long as other hoses. Whether you have high temperature cleaning needs or need to transfer heated oil...
Read More
Posted By: quinton.watkins
1/10/2020 1:17 PM
Quick disconnect couplings provide a means of quickly connecting and disconnecting a hose line without the loss or fluid or entrance of air/contaminants into the system. When equipment needs to be assembled quickly or if it needs routine service...
Read More
Posted By: quinton.watkins
1/9/2020 3:19 PM
NEW! Metal Work EB80
 Electro-Pneumatic Systems

This article will help make the EB80 module known, by placing more emphasis on the questions that the reader may have, rather than providing a list of characteristics and...
Read More
Posted By: quinton.watkins
1/9/2020 2:32 PM
Suction and Discharge Hose

The seasons are turning and that means it's time to look toward the equipment that can handle the load. Eaton’s suction and discharge hose lines are available in both standard and premium...
Read More
Posted By: quinton.watkins