Filter Your Search
Shop by Category
DMIC Products
BVH1250S1111AZZA
Steel construction rated up to 7500 PSI for continuous/normal operation with Unrestricted bore offered, Steel Balls, for minimal system pressure drop
C25SGSB04N
C25SGSB04N GAUGE 2.5” STM GLY SST 0-100 P PER MPS-025 (LOWER/STEM MOUNT )
BVLS0500N2223
BVAL is the first ball valve of its kind, specifically designed for leak-free Hydraulic Suction, Vacuum to 29” & Return line durability to 6” full bore. Optimized for DMIC’s “SSW” System – All sizes unrestricted bore
NVHH0375S1141
Flow-regulating, steel or stainless steel body needle valves provide metered flow in both directions.
CVH053000N12
Flow restricting check valves permit flow in one direction once the line pressure exceeds the cracking pressure of the poppet spring. Reverse flow is blocked, however an optional poppet orifice can permit some backflow.
CVH053000N12
Flow restricting check valves permit flow in one direction once the line pressure exceeds the cracking pressure of the poppet spring. Reverse flow is blocked, however an optional poppet orifice can permit some backflow.
BVH0500J2211ZGZA
Steel construction rated up to 7500 PSI for continuous/normal operation with Unrestricted bore offered, Steel Balls, for minimal system pressure drop
BVH0500J2211ZGZA
Steel construction rated up to 7500 PSI for continuous/normal operation with Unrestricted bore offered, Steel Balls, for minimal system pressure drop
BVDM07FK1111AZZA
DMIC BVDM is the most compact and lowest cost choice when an SAE 4-Bolt or Split Flange Connection is desired.